The ducting is manufactured with a hypalon, high temperature lead, and is available in 3m and 7.6m lengths. Other accessories include a two-way splitter, pneumatic wheel kit and pre-heat oil filter.

The EC85s 105 litre fuel tank is sufficient to support 12 hours continuous running in the manual however, the unit is more often operated in conjunction with a heavy duty thermostat. The heavy duty thermostat (02AC582) has a temperature range of -5/+50°C and is supplied with 10m of cable as standard.

The EC85s are often required to hear semi-permanent or permanent structures, and in these circumstances, the heater can be converted to a single pipe system by way of a tigerloop; the heater would then usually be connected to a bunded fuel tank or other such IBC (Intermediary Bulk Container). The unit along with the IBC is located externally and ducted into the building.

The units can be set up for an internal temperature requirement of 15 or 20 degrees depending on the usage of the building. This is based on an external temperature of -5 degrees.

The EC85 will carry a 3-year warranty on units that are purchased.